Texturing Jet Nozzle (ATY)
Texturing Jet Nozzle (ATY)
- For air textured yarn of filament
- Tight and even loop.
- High speed texturing available.
- Low air consumption (Energy saving)
- Various types of nozzles are available.
- High hardness of material(IMC-3) makes
- less abrasion and long lifetime of nozzles.
- Special nozzles are available on request.
TYPE | Feeding Denier | Winding Speed(m/min) | Denier Per Filament | Pressure Range | Effect Yarn Over-feed(%) | Air Consumption |
311 | 30~400 | ~650 | 1~2.5 | 8~14 | ~60% | 0.54x(Pe+1) |
321 | 150~550 | ~650 | 1.5~4.0 | 8~14 | ~70% | 0.81x(Pe+1) |
341 | 250~1100 | ~500 | 2.5~6.0 | 8~14 | ~80% | 1.46x(Pe+1) |
351 | 500~3000 | ~500 | ~22 | 8~14 | ~80% | 2.05x(Pe+1) |
Recommended condition
- Range of pressure : 8 ~ 14 bar
- Temperature : 20 ~ 30℃
- Relative humidity : upto 40%
- Maximum residual oil content : 0.1 mg/m3
- No abrasive particles, size under 1㎛, Density under 1mg/m3
- Previous Product:Air Texturing ATY Housing for ATY Yarn Production